PlainToolkit
English

Card & Label Sheet

Repeat at exact size on one sheet

Choose a file

Drop a file hereTap to choose a fileDrop it hereOne card or label design fills every cell. It is never uploaded.One card or label design fills every cell. It is never uploaded.

Settings

Measuring your own labels and typing the size in is the most accurate way.

Marks go in the outer margin only, so nothing is left on the piece you cut out.

Result

Choose a design and the layout appears here.

Open the saved image and print it at actual size (100% scale). Your design stays in your browser and is never sent to a server.

How to use

Repeats one business-card or label design at its real size across a sheet. Cell dimensions are set in millimetres, so the result matches the label stock you actually have. The design stays in your browser.

When to use it

  • Printing and cutting your own business cards.
  • Matching a commercial label sheet, such as address labels.
  • Running off multiple copies of the same sticker.

How to use it

  1. Choose one design; every cell gets the same image.
  2. Pick a preset size, or type the cell width and height in millimetres.
  3. Set the paper, orientation, outer margin and gap. The number of cells per sheet is shown as you go.
  4. Turn on cut marks if you want them, then save as an image.

Good to know

  • Measuring your own labels with a ruler beats the manufacturer's figures. Two sheets both called "business card" can differ by a millimetre or two.
  • The tool reports how many more fit if you swap width and height, so you can see at a glance which orientation wins.
  • If the design would be cropped, you are told what percentage beforehand.
  • Cut marks live in the outer margin only, so trimmed cards carry no lines.
  • Print at 100% scale (actual size) or the dimensions will not match.

Frequently asked questions

How do I line up with label stock exactly?

Measure the sheet yourself rather than trusting the listed size, enter the cell size, margin and gap, then test-print on plain paper and hold it against the labels. One sheet of paper saves a sheet of labels.

The print creeps out of alignment.

Printers grip paper slightly differently. Adjust the outer margin by a millimetre or two and confirm the print dialog is set to 100% scale.

Can each card carry different text?

This tool repeats one design. For different content per cell, use the image sheet layout and supply a different photo for each.

How do I make the design?

Use a PNG from the nameplate maker on this site or any design tool. For print, build it at 300DPI — the paper/DPI/pixel tool tells you the pixel size you need.